The Virtual Breadboard package contains the components built into Virtual Breadboard.
|
| |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
| Since V1.0 | Group | Description |
| DIPN | DIP SWITCHES | The DIP component is an N (N=1|4|8) array of DIP switches which are connected to 5V when Switch = ON and 0V (GND) when Switch = OFF. |
| DMM | DIGITAL METERS | The DMM component is a digital voltage meter which reads the voltage at the pin. |
| PCBBUS-Socket | PCBINTERCONNECT |
PCBBUS-Socket and PCBBUS-Plug are 8-way PCB Interconnect components used to join one or more Breadboard circuits together. |
| PCBBUS-Plug | PCBINTERCONNECT |
PCBBUS-Socket and PCBBUS-Plug are 8-way PCB Interconnect components used to join one or more Breadboard circuits together. |
| PCB-Plug | PCBINTERCONNECT | PCB-Socket and PCB-Plug are PCB Interconnect components used to join one or more Breadboard circuits together. |
| PCB-Socket | PCBINTERCONNECT | PCB-Socket and PCB-Plug are PCB Interconnect components used to join one or more Breadboard circuits together. |
| FEEDBACK | FEEDBACK COMPONENTS | The Feedback component is a special component that is required by Virtual Breadboard to evaluate circuits that utilise feedback loops. |
| Junction | Junctions |
The Junction component is single pin, used for redirecting wiring and circuit organisation. |
| Label | Label | Label is a documentation component, used to add text to a breadboard. |
| VSource | Voltage sources | VSource is a fixed voltage source where the output voltage is determined by property VOLTAGE. |
| VDD | Voltage sources | VDD is a 5V-voltage source/reference. |
| VSS | Voltage sources | VSS is a 0V-voltage (GND) source/reference. |
| PULLUP | WIRING JOIN | The pullup component simulates the behaviour of a pullup resistor. |
| NC | FEEDBACK COMPONENTS | The NC or “Not Connected” component is an open-circuit source/reference. |
| JoinN | WIRING JOIN | The JOIN component is an N (N=2|4|8) alternative Link which joins N input links together into a single output links. |
| Crisscross | Wiring crossovers | The CRISSCROSS component is a crossover wiring component to make circuit organisation easier where pinouts have the reverse orientation to one another. |
| Pot | Potentiometers | The POT (potentiometer) is a variable voltage divider and consists of two inputs and a single output. |
| Timer | Timers | The Timer component simulates the operation of a 555 Timer. |
| Switch | Switches | The Switch component is an interactive switch. |
| Button | Switches | The Button component is an interactive switch. |
| LED | LEDs | The LED component is a Light Emitting Diode (LED) indicator. |
| LEDN | LEDs | The LED component is an N (N=1|4|8) array of Light Emitting Diode (LED) indicators. |
| JumpN | Jumper switches | The JUMPER component is an N (N=1|4|8) array of switches which form a short circuit between the Nth input/output pin pair when the Nth Switch = ON and open-circuit O/C when Nth Switch = OFF. |
| SEG7 | 7 Segment Displays | The SEG7 component is a 7-Segment Display module, which consists of a versatile array of LEDS which can be sequenced to form numbers and a limited form of alphanumeric character. |
| Keypad 4x4 | Keypads | The KEYPAD4x4 component consists of a 4 x 4 array of touch switches |
| Relay | Relays | The RELAY component is a voltage-activated switch consisting of two bi-directional switched connections and a switching input. |
| Diode | Relays | |
| Comparator | Voltage operators | The comparator component consists of a POSITIVE input, NEGATIVE input and OUTPUT. |
| Inverter | Logic gates | The LOGIC component series of NOT, AND, OR, XOR, NAND, NOR, XNOR gates in 2, 4 and 8 input gate formats. These devices perform the standard logic functions as per device description. |
| ANDN | Logic gates | The LOGIC component series of NOT, AND, OR, XOR, NAND, NOR, XNOR gates in 2, 4 and 8 input gate formats. These devices perform the standard logic functions as per device description. |
| NANDN | Logic gates | The LOGIC component series of NOT, AND, OR, XOR, NAND, NOR, XNOR gates in 2, 4 and 8 input gate formats. These devices perform the standard logic functions as per device description. |
| ORN | Logic gates | The LOGIC component series of NOT, AND, OR, XOR, NAND, NOR, XNOR gates in 2, 4 and 8 input gate formats. These devices perform the standard logic functions as per device description. |
| NORN | Logic gates | The LOGIC component series of NOT, AND, OR, XOR, NAND, NOR, XNOR gates in 2, 4 and 8 input gate formats. These devices perform the standard logic functions as per device description. |
| XORN | Logic gates | The LOGIC component series of NOT, AND, OR, XOR, NAND, NOR, XNOR gates in 2, 4 and 8 input gate formats. These devices perform the standard logic functions as per device description. |
| XNORN | Logic gates | The LOGIC component series of NOT, AND, OR, XOR, NAND, NOR, XNOR gates in 2, 4 and 8 input gate formats. These devices perform the standard logic functions as per device description. |
| Latch | Latches | The Latch component is a Flip-Flop featuring CLOCK and DATA Inputs and OUTPUT and INVERTED outputs. DATA is transferred to the OUTPUT when CLOCK is HIGH and latched at the last DATA value when on the negative-going edge of CLOCK. |
| Dtype | Latches | The DTYPE Flip-Flop is a popular circuit component featuring CLOCK and DATA inputs and OUTPUT and INVERTED outputs. |
| SR | Latches | The SR Flip-Flop is a flip-flop featuring CLOCK, Set (S) , Reset(R) inputs and OUTPUT and INVERTED outputs. |
| JK | Latches | The JK Flip-Flop is an edge-triggered flip-flop featuring CLOCK, J, K inputs and OUTPUT and INVERTED outputs. |
| Tri-State Registers | Tri-State Registers | The TRIS component is a 3-state output buffer consisting of an INPUT, TRIS inputs and OUTPUT output. |
| Since V1.1 | Group | Description |
| KEYPADDECODED | KEYPADS | 4x4 KEYPAD with decoded output |
| KEYPADSERIAL | KEYPADS | 4x4 KEYPAD with serial output |
| POTSLIDER | POTENTIOMETERS | The POTSLIDER is an interactive slider style potentiometer which enables the user to vary the output voltage by the position of the slide. |
| VOLTAGEDIVIDER8 | POTENTIOMETERS | The VoltageDivider8 component is a series equidistant resister series with 8 break-out points. |
| DIGITAL8 | DIGITAL METERS | The Digital8 component can be attached to an 8Bit port to read and display the value on the port. |
| DIGITAL16 | DIGITAL METERS | The Digital16 component can be attached to two 8Bit ports to read and display the 16 bit value on the port. |
| SIMMSTICKMOTHER | PCBINTERCONNECT | |
| SIMMSTICKDAUGHTER | PCBINTERCONNECT | |
| ujSTICK | PCBINTERCONNECT | |
| RS232 | COMMUNICATIONS | |
| I2C | COMMUNICATIONS | |
| Netlabel | JUNCTIONS | The NetLabel component allows nodes to terminate as a Label. |
| WIREDAND | WIRING JOIN | The WIREDAND component is a special component that enables components to be wired together using the WIREDAND technique. |
| Crisscross4 | Wiring crossovers | The CRISSCROSS4 component is a crossover wiring component to make circuit organisation easier where pinouts have the reverse orientation to one another. |
| DialN | Switching dials | The switching dial component is an interactive switching component with N positions, allowing the output pin to be connected to one of N different links. |
| Keypad 5x3 | Keypads | The KEYPAD5x3 component consists of a 5 x 3 array of touch switches |
| Keypad 4x3 | Keypads | The KEYPAD4x3 component consists of a 4 x 3 array of touch switches |
| VSumN | Voltage Summers | |
| VGAIN | Voltage Operators | |
| MOMENTARY | Switches |